Taking air/fuel tuning to the next level, the Muzzy Digi-Tune
PRO uses the latest technology to provide one of the easiest and
most accurate
methods of air/fuel adjustment.
The Muzzy Digi-Tune PRO comes pre-programmed and optimized for the each specific model. There is no mapping or re-mapping necessary. Adjustments
for elevation and/or modifications can be done "on-the-fly" using
three buttons on the faceplate.
What sets the new PRO version apart from the standard Digitune is
the ability to remove fuel from the stock curve. Additionally, some models of the
Digi-Tune
PRO
include
the
ability
to run in Closed-Loop† mode by connecting the 0-5 volt input
lead to the corresponding output on an air/fuel meter such as the
Wego III*. The Digi-Tune PRO will
use the input voltage to keep the air/fuel mixture within a pre-configured
range. Closed-Loop mode
eliminates the need to make manual adjustments for elevation or
weather change.
WHY IT'S BETTER:
The Digi-Tune is a load based fuel adder which works with
the factory ECU. The Digi-Tune's simple push button interface and
powerful load based technology renders complex table-based throttle
position
and RPM re-mapping systems a thing of the past.
LOAD
BASED TUNING:
The Digi-Tune ushers in the latest in tuning science – gone
is the old throttle position and RPM (Alpha-N) based tuning, replaced
by a powerful and highly effective LOAD BASED tuning methodology.
Load based tuning is superior to old school systems because different
CVT ratios place different loads on the engine. RPM and throttle
position based systems cannot tell the difference from
one ratio to another. The Digi-Tune knows the difference and adds
the proper amount of
fuel for every gear ratio, in every situation.
*Not compatible with all air/fuel meters. Air/fuel meter must have
0-5 volt output. Please specify Air/Fuel meter being used at time
of purchase. The Digi-tune
PRO
may require
air/fuel
meter
specific
programming
prior
to shipping.
†Closed loop mode operates in the Digi-tune's full throttle "red" fuel zone.
††Closed loop mode not available on these models.
|
